Snap-Lok Clip
Snap-Lok Clip Standing Seam Metal Roofing Profiles
A Snap-Lok Clip Standing Seam Metal Panel System delivers the classic look of continuous interlocking seams, but with no mechanical seaming required. Instead, hidden clips are fastened to the roof deck underneath panels offering excellent hold-down strength, then "snapped together" with panel ends for a clean, modern aesthetic. The result is a metal roofing system with high structural performance and excellent expansion and contraction capability as temperatures fluctuate.
175SLAllSeam
1-3/4" Snap-Lok Clip Standing Seam Panel
Seam Width: 1/2-inch, No mechanical seaming
Substrate: 22-, 24-, 26-gauge steel or .032, .040 aluminum
Slope: 2:12 or greater slope
Support: Wood deck 15/32-inch or greater plywood or steel deck
Coverage: 14 inches or 18 inches
155SLAllSeam
1-1/2" Snap-Lok Clip Standing Seam Panel
Seam Width: 7/16-inch, No mechanical seaming
Substrate: 22-, 24-, 26-gauge steel or .032, .040 aluminum
Slope: 2:12 or greater slope
Support: Wood deck 15/32-inch or greater plywood, or 3/4-inch min. solid wood plank
Coverage: 12 inches, 16 inches or 20 inches
145SLAllSeam
1-1/2" Snap-Lok Clip Standing Seam Panel
Seam Width: 5/32-inch, No mechanical seaming
Substrate: 22-, 24-, 26-gauge steel or .032, .040 aluminum
Slope: 2:12 or greater slope
Support: Wood deck 15/32-inch or greater plywood, or 3/4-inch minimum solid wood plank
Coverage: 15-1/2 inches
TESTING FOR SNAP-LOK CLIP STANDING SEAM PANELS
Uplift Resistance: UL 580, UL 1897, TAS 110, TAS 125
Wind-Driven Rain: TAS 100
Tensile Strength: ASTM E8
Fire Rating: UL 790
Accelerated Coating: ASTM G152
Salt Spray Coating: ASTM B117
Florida Building Code: HVHZ/Non-HVHZ Approved
Miami-Dade Approved: Product Control Approved
