iStock-114384070.jpg

Exposed Fastener

Exposed Fastener Metal Panel Roofing Profiles

Exposed Fastener Metal Roofing and Wall Panel Systems offer a classic metal panel look with the distinct feature of exposed fasteners (screws), visible on top of panels. Primarily used for residential and agricultural applications, these versatile metal profiles are known for their ease of installation and affordable price point. No seaming or special tools are required.  Exposed fastener metal panels can usually be installed horizontally or vertically making them great for soffits, mansard roofs or a striking accent for interior applications.

 

While exposed fastener metal roofing and metal wall panel systems offer durability and long-term protection from extreme weather, they do require a little more maintenance than concealed fastener panels.  Over time, the natural expansion and contraction of metal when exposed to the elements will put stress on fasteners. Gradual deterioration of screws and their rubber washers from UV rays also occurs. To ensure the longevity of an exposed fastener metal panel system, proper installation, more routine maintenance and fastener replacement as needed are highly recommended.

1/2" 5V Crimp Panel - Cross Section

50AllV
1/2" 5V Crimp Panel

Substrate: 24-, 26-gauge steel or .032, .040 aluminum

Slope: 3:12 or greater slope

Support: 15/32-inch or greater plywood, or 3/4-inch minimum solid wood plank

Coverage: 21 inches or 24 inches

Rib Spacing: 10-1/2" or 12" on center

1/2" 5V Crimp Panel

50AllRIB
3/4" Trapezoidal Bell RIB Panel

Substrate: 24-, 26- or 29-guage steel

Slope: 3:12 or greater

Support: 15/32" or greater thickness plywood, steel deck or open framing

Coverage:  36-inch (Standard)

Rib Spacing: 9" on center

3/4" Trapezoidal Bell RIB Panel
3/4" Trapezoidal Bell RIB Panel - Cross Section

50AllPBR
1-1/4" Trapezoidal RIB Panel

Substrate: 24-or 26-guage steel

Slope: 3:12 or greater

Support: 15/32" or greater thickness plywood, steel deck or open framing

Coverage:  36-inch (Standard)

Rib Spacing: 12" on center

1-1/4" Trapezoidal RIB Panel
1-1/4" Trapezoidal RIB Panel - Cross Section

50AllCOR

3/4" Corrugated Wave Panel

Substrate: 24-or 26-guage steel

Slope: 3:12 or greater

Support: 15/32" or greater thickness plywood, 3/4-inch minimum solid wood plank or open framing

Coverage:  21 inches or 29-1/2 inches

Rib Spacing: 3" on center

21 inches

3/4" Corrugated Wave Panel
3/4" Corrugated Wave Panel - Cross Section

29-1/2 inches

3/4" Corrugated Wave Panel - 29.5"
3/4" Corrugated Wave Panel - 29.5" Cross Section

TESTING FOR EXPOSED FASTENER PANELS

Uplift Resistance: UL 580, UL 1897, TAS 125

Wind-Driven Rain: TAS 100

Tensile Strength: ASTM E8

Fire Rating: UL 790

Florida Building Code: HVHZ/Non-HVHZ Approved

Miami-Dade Approved: Product Control Approved

shutterstock_413895925.jpg